塑胶原料供应商-东莞远翔

VALOX FR Resin ENH8530  (PBT+PET)-GF15 FR SABIC

 二维码 5
VALOX? FR Resin ENH8530 | (PBT+PET)-GF15 FR | SABIC
材料文字说明
VALOX ENH8530 is a 15% glass reinforced, non-chlorinated/brominated flame retardant Polybutylene Terephthalate/Polyethylene Terephthalate (PBT/PET) injection moldable grade with excellent chemical resistance. It has a UL94V0@1.5mm and 5VA@2.0mm flame rating. This is a good candidate for a variety of applications needing a sustainable FR PBT/PET solution.
流变性能价值单位测试标准
熔体体积流动速度, MVR45cm3/10minISO 1133
温度265°CISO 1133
负荷5kgISO 1133
机械性能价值单位测试标准
拉伸模量7400MPaISO 527-1/-2
屈服应力75MPaISO 527-1/-2
屈服伸长率2%ISO 527-1/-2
撕裂强度5kN/mISO 34-1
热性能价值单位测试标准
热变形温度, 1.80 MPa180°CISO 75-1/-2
热变形温度, 0.45 MPa215°CISO 75-1/-2
维卡软化温度, 50°C/h 50N196°CISO 306
1.5mm名义厚度时的燃烧性V-0classIEC 60695-11-10
测试用试样的厚度1.5mmIEC 60695-11-10
厚度为h时的5V燃烧性5VAclassIEC 60695-11-20
测试用试样的厚度2.0mmIEC 60695-11-20
电性能价值单位测试标准
相对介电常数., 1MHz3.3-IEC 62631-2-1
介质损耗因子, 1MHz100E-4IEC 62631-2-1
体积电阻率1E13Ohm*mIEC 62631-3-1
表面电阻率>1E15OhmIEC 62631-3-2
介电强度38kV/mmIEC 60243-1
相对漏电起痕指数400-IEC 60112
其它性能价值单位测试标准
密度1460kg/m3ISO 1183
模塑测量的特殊性能价值单位测试标准
悬臂梁冲击强度 (+23°C), 4mm22kJ/m2ISO 180/1U
悬臂梁冲击强度 (-30°C), 4mm20kJ/m2ISO 180/1U
悬臂梁缺口冲击强度 (-30° C), 4mm5kJ/m2ISO 180/1A
典型数据
加工方法
注塑


会员登录
登录
我的资料
我的收藏
留言
回到顶部
http://www.xgbdqbw.com http://www.bjnywy.com http://www.jinhuisheji.com http://www.wapfap.com http://www.amandang.com http://www.czdongao.com http://www.scorpene.com http://www.scanpore.com http://www.liduhotelzunyi.com http://www.sjlflj.com http://www.025mpc.com http://www.finnmsm.com http://www.xhgjh.com http://www.gazosoku.com http://www.nzswampkauri.com http://www.plannerbase.com http://www.bjyxyfy.com http://www.makstroy.com http://www.zc730.com http://www.kh1818.com http://www.clickale.com http://www.china-yaxin.com http://www.fxfk4.com http://www.020hjc.com http://www.saintmad.com http://www.ponrepo.com http://www.baideli2car.com http://www.bath8.com http://www.ftoilpurifier.com http://www.blszz.com