塑胶原料供应商-东莞远翔

VALOX FR Resin ENH4530  PBT-GF15 FR  SABIC

 二维码 9
VALOX? FR Resin ENH4530 | PBT-GF15 FR | SABIC
材料文字说明
VALOX ENH4530 is a 15% glass reinforced, non-chlorinated/brominated flame retardant Polybutylene Terephthalate (PBT) injection moldable grade with excellent chemical resistance. It has a UL94V0@0.80mm flame rating. This is a good candidate for a variety of applications needing a sustainable FR PBT solution.
流变性能价值单位测试标准
熔体体积流动速度, MVR18cm3/10minISO 1133
温度265°CISO 1133
负荷5kgISO 1133
机械性能价值单位测试标准
拉伸模量7500MPaISO 527-1/-2
屈服应力80MPaISO 527-1/-2
屈服伸长率2%ISO 527-1/-2
简支梁缺口冲击强度, +23°C4kJ/m2ISO 179/1eA
撕裂强度6kN/mISO 34-1
热性能价值单位测试标准
热变形温度, 1.80 MPa200°CISO 75-1/-2
热变形温度, 0.45 MPa220°CISO 75-1/-2
维卡软化温度, 50°C/h 50N205°CISO 306
厚度为h时的燃烧性V-0classIEC 60695-11-10
测试用试样的厚度0.5mmIEC 60695-11-10
厚度为h时的5V燃烧性5VAclassIEC 60695-11-20
测试用试样的厚度2.0mmIEC 60695-11-20
燃烧性-氧指数31%ISO 4589-1/-2
电性能价值单位测试标准
相对介电常数., 1MHz3.7-IEC 62631-2-1
介质损耗因子, 1MHz1500E-4IEC 62631-2-1
体积电阻率1E13Ohm*mIEC 62631-3-1
表面电阻率>1E15OhmIEC 62631-3-2
介电强度28kV/mmIEC 60243-1
其它性能价值单位测试标准
吸水性0.15%类似ISO 62
吸湿性0.07%类似ISO 62
密度1450kg/m3ISO 1183
模塑测量的特殊性能价值单位测试标准
悬臂梁冲击强度 (+23°C), 4mm30kJ/m2ISO 180/1U
悬臂梁冲击强度 (-30°C), 4mm23kJ/m2ISO 180/1U
悬臂梁缺口冲击强度 (-30° C), 4mm6kJ/m2ISO 180/1A
典型数据
加工方法
注塑


会员登录
登录
我的资料
我的收藏
留言
回到顶部
http://www.tomoplan.com http://www.rbschips.com http://www.dyyurui.com http://www.tinbou.com http://www.hkbytt.com http://www.jingshijiaodai.com http://www.zjfzz.com http://www.bfhyspq.com http://www.cesarcds.com http://www.gcyongxin.com http://www.metmaps.com http://www.high-win.com http://www.haobanlvwuye.com http://www.jialongz.com http://www.daditools.com http://www.0722rcw.com http://www.friesrus.com http://www.dh-sk.com http://www.ahyaxin.com http://www.citywust.com http://www.tiantianbc.com http://www.hr-houses.com http://www.noephoto.com http://www.pebanda.com http://www.mkxvalve.com http://www.teamjca.com http://www.nnja168.com http://www.onamoe.com http://www.fyddwx.com http://www.mstolle.com